7 Series E38 728i (M52TU) SAL
Mark spots on both outer edges at distance of
(A) = 80 mm and (B) = 50 mm and then connect them with cutting
line (1).
Mark spot (2) from right outer edge at distance of
(C) = 90 mm with measurement (B) = 40 mm.
Mark spot (1) from left outer edge with measurement (A) = 20 mm.
Connect spots (1) and (2) with cutting line (3).
Mark spot (2) from right outer edge at distance of
(C) = 90 mm with measurement (B) = 20 mm.
Mark spot (5) from left outer edge with measurement (B) = 20 mm.
Mark spot (3) from left outer edge with measurement (A) = 20 mm.
Mark spot (4) from spot (3) at right angles
with measurement (B) = 20 mm.
Connect spots (2), (5), (4) and (3) with cutting line (1).
Cut out sound insulation for instrument panel trim along marked
cutting lines.
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
26.01.2013 21:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
