7 Series E38 728i (M52TU) SAL
View of mounting bolt on A-pillar with end fitting of ITS head
airbag
1.
End fitting of ITS head airbag
2.
Lock washer
3.
Mounting bolt on A-pillar
Unfasten screws (1 and 2).
Remove bracket on A-pillar.
Installation:
Tightening Torque,
refer to Technical Data 72 12 3AZ.
Unfasten screws (1 and 2).
Push back dual bracket on A-pillar (3).
Remove dual bracket on A-pillar towards front (4).
Installation:
Tightening Torque,
refer to Technical Data 72 12 3AZ.
During installation, ensure proper seating of retaining lugs in
body.
View of dual bracket on A-pillar
1.
Holes for retaining lugs in body
2.
Retaining lugs
3.
Dual bracket on A-pillar
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
26.01.2013 21:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
