7 Series E38 728i (M52TU) SAL
Installation:
Replace O-ring.
Fit special tool 00 0 200 to special tool 00 0 201/202/204/208
and attach. Secure special tool 00 0 200 to the front suspension
lug on the engine.
Note:
The supports (1) of special tool 00 0 208 must make contact
with the screws on the side panels.
Tighten the screws (1 and 2).
Raise engine with special tool 00 0 200 approx. 5 mm.
RA Removing and installing, sealing or replacing oil sump (M52 / M52TU / M54)
BMW AG - TIS
23.02.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -