bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Intake Air Manifold (M52TU)|Page 666 > < 1 RA Removing And Installing_replacing Coolant Thermostat (M52TU _ M54 _ M56)|Page 663
Page 1
background image

11 61 050

Removing and installing intake air manifold
(M52TU)

Instructions for disconnecting and connecting battery.

Disconnect negative battery lead.

E46 only

Disconnect battery positive lead from battery connection point.

Remove microfilter.

Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).

Release screws (1) and remove lower section of microfilter
housing (2).

Remove cover from fuel injectors.

Caution!

Do not mix up oxygen monitor sensors for cylinders 1 to 3
and 4 to 6 at plug connection to wiring harness. Mark plug
connections. 

Unclip plug connections (1) from holder.

Detach retainer (2) from battery positive lead.

RA  Removing and installing intake air manifold (M52TU)

BMW AG - TIS

23.02.2013  01:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Intake Air Manifold (M52TU)|Page 666 > < 1 RA Removing And Installing_replacing Coolant Thermostat (M52TU _ M54 _ M56)|Page 663