7 Series E38 728i (M52TU) SAL
Installation:
M52 plastic cover:
Screw down grounding strap (1) of cable duct with connecting
plate (2) of ignition coils.
Installation:
Plastic cover M52TU, M54:
Screw down grounding strap (1) of connecting plate of ignition
coils with retaining pin of ignition coil of cylinder 1.
Screw down grounding strap (2) of cable duct with connecting
plate of ignition coils between cylinders 2 and 3.
Version with rod-type ignition coils:
Unlock plug retainer of ignition coil (1) and disconnect plug.
Pull ignition coil (1) up and out.
Installation:
Check that rubber seal of ignition coil (1) is correctly seated.
RA Replacing ignition coil (M52, M52TU, S52, S50US, M54)
BMW AG - TIS
23.02.2013 01:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -