7 Series E38 728i (M52TU) SAL
17 00 005
Draining and topping up coolant
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Draining coolant
Unfasten cap on expansion tank.
M62
Unfasten cap on expansion tank.
Release vent screw.
If necessary, remove front underbody protection from units.
Unscrew drain plug at bottom of radiator.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 17 11 2AZ.
Drain, catch and dispose of coolant.
RA Draining and topping up coolant
BMW AG - TIS
23.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
