7 Series E38 728i (M52TU) SAL
Remove thrust washer (1), axial needle bearing (2) and angled
disc (3).
Installation:
Note installation position.
Note:
When removing the sun gear, check whether marking groove
in sun gear is facing upwards or downwards. The sun gear (1)
must be installed in the same position.
Remove sun gear I (1) from planet spider I (2).
Lift out snap ring (1).
Installation:
Note installation position of snap ring ends.
Remove planet spider I (1) and ring gear II (2) from ring
gear I (3).
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
23.02.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 20 -
