7 Series E38 728i (M52TU) SAL
31 35 005
Removing and installing push rod for left or
right stabilizer
Note:
Only perform work with wheels in straight-ahead position.
Unfasten push rod - brace with open-end wrench.
Installation:
Replace self-locking nut. Tightening torque,
refer to Technical Data 31 35 5AZ
Unfasten push rod - brace with open-end wrench - and remove.
Installation:
Replace self-locking nut. For tightening torque,
refer to Technical Data 31 35 5AZ.
Caution!
Brake hose must not be located between push rod and spring
strut shock absorber.
RA Removing and installing push rod for left or right stabilizer
BMW AG - TIS
23.02.2013 04:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
