7 Series E38 728i (M52TU) SAL
31 33 095
Measuring ride-level height of vehicle
Move vehicle into normal position,
refer to Technical Data MG 32
Measure actual ride-level height (A) from wheel-house lower edge
(1) to rim flange (2) at height of wheel center.
Establish the mean value in each case after previously raising and
lowering the vehicle body for each wheel and from it the mean
value of the axle.
If the mean value deviates from the nominal value,
refer to Technical Data
Install new coil spring, refer to selection of coil springs in Parts
Microfiche/EPC.
RA Measuring ride-level height of vehicle
BMW AG - TIS
23.02.2013 04:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
