bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Complete Rear Axle Carrier|Page 1527 > < 4 RA Replacing Both Gaiters On Left And Right Of Output Shaft|Page 1524
Page 1
background image

33 31 000

Removing and installing complete rear axle
carrier

Remove wheels,

refer to 36 10 300.

Remove propeller shaft,

refer to 26 11 000.

Draw fuel out of right half of tank,

refer to 16 00 005. 

Disconnect hose from tank filler pipe and seal,

refer to 16 11 060.

Remove left and right brake calipers and tie up on body,

refer to 34 21 320.

Remove left and right ABS impulse sensors,

refer to 34 52 525.

Disconnect Bowden cable on parking brake from connecting
piece.

Unfasten right Bowden cable bracket from body.

Unfasten nut and disconnect control rod.

Remove level control valve from rear axle carrier. 

RA  Removing and installing complete rear axle carrier

BMW AG - TIS

23.02.2013  05:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Complete Rear Axle Carrier|Page 1527 > < 4 RA Replacing Both Gaiters On Left And Right Of Output Shaft|Page 1524