7 Series E38 728i (M52TU) SAL
33 32 091
Replacing one traction strut
Caution!
After assembly, perform rear wheel alignment
check/adjustment.
Remove wheel,
refer to 36 10 300
Unfasten nut.
Installation:
Replace nut.
Tightening Torque,
refer to Technical Data 33 32 5AZ
Unfasten nut.
Installation:
Tapered pin and bore free of grease.
Replace nut.
Tightening Torque,
refer to Technical Data 33 32 4AZ
RA Replacing one traction strut
BMW AG - TIS
23.02.2013 06:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
