7 Series E38 728i (M52TU) SAL
Unfasten nut with special tool 31 2 210 (brace with ring spanner)
and remove shock absorber.
Follow notes (1 and 2) if a new coil spring is installed.
Note 1:
Relieve tension on special tool 31 3 121 and remove coil spring.
The special tool must not be tightened or untightened with an
impact screwdriver.
Note 2:
Accommodate new coil spring in special tool in such a way that a
coil is outside spring holders on both sides.
Warning!
When tensioned, the spring coils must rest completely in the
spring holder recess.
The special tool must not be tightened or untightened with an
impact screwdriver.
The coils may not be tensioned on a block.
Tension coil spring.
RA Removing and installing / replacing rear left or right coil spring
BMW AG - TIS
23.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
