7 Series E38 728i (M52TU) SAL
35 21 000
Removing and installing or replacing brake
pedal
Remove lower left trim panel from instrument panel.
Remove brake light switch,
refer to 61 31 310
Remove retainers (1).
Withdraw pin (2).
Remove brake pedal.
Installation:
Check bearing bushes (1) and replace if necessary.
Apply light coat of grease to bearing bushes (1) and bore (2), refer
to BMW Service Operating Fluids.
Attach spring in bore.
RA Removing and installing or replacing brake pedal
BMW AG - TIS
23.02.2013 06:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -