7 Series E38 728i (M52TU) SAL
35 51 001
Removing and installing or replacing parking
brake foot pedal
Note:
For better visibility work is illustrated with pedals removed.
Remove lower left trim section.
Remove retainer (1) and disconnect Bowden cable.
If necessary, open retaining pin (1) on both ball heads and pull off.
Installation:
Replace retaining pin (1).
Lever out gas strut (1).
Remove retainer (2).
Remove parking brake pedal.
RA Removing and installing or replacing parking brake foot pedal
BMW AG - TIS
23.02.2013 07:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -