7 Series E38 728i (M52TU) SAL
37 14 027
Removing and installing/replacing the rear
fitted acceleration sensor (EDC)
Remove the rear right wheel,
refer to 36 10 300.
Remove the protective housing of the plug connections.
Remove wheel arch trim.
Pull off the connector of the fitted acceleration sensor (rear
wheel arch).
Loosen the bolts and remove the fitted acceleration sensor.
RA Removing and installing/replacing the rear fitted acceleration sensor (EDC)
BMW AG - TIS
23.02.2013 07:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
