7 Series E38 728i (M52TU) SAL
Expose connection points between: wheel arch / end wall, wheel
arch / carrier support, wheel arch / carrier plate.
Separate wheel arch over connection point engine support.
Remove wheel arch.
Expose connection point between partition wall carrier plate / end
wall and drill out welding spots.
Remove residual sheet metal.
Expose connection point between front / rear sections of engine
support and between front section of engine support / end wall.
Drill out welding spots and open up welded seams.
RA Replacing front section of engine support to left wheel arch
BMW AG - TIS
23.02.2013 07:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -