7 Series E38 728i (M52TU) SAL
51 16 026
Replacing mirror glass
Note:
With the E 38, BMW offers a choice of normal mirror glass
or mirror glass with automatic dip action (electro-chrome
technology). The removal procedure differs from one type
of mirror to another (risk of damage).
Mirror without automatic dip action:
The mirror glass does not have a plastic frame.
Important!
Make sure car has room temperature to prevent the clips from
breaking off.
Tilt mirror glass.
Remove cement between mirror glass and edge of housing (risk
of damage).
Unclip mirror glass using a wooden wedge.
If applicable, remove connector (mirror glass heating) and remove
mirror glass.
Installation:
Install mirror glass that clips are seated on tabs and clip on
glass. Ensure correct engagement.
Check function.
RA Replacing mirror glass
BMW AG - TIS
23.02.2013 08:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
