7 Series E38 728i (M52TU) SAL
Unfasten screws starting at bottom and pull rear panel upwards to
remove.
Installation:
Position backrest adjustment unit fully forwards and briefly
release from stop setting.
Position rear panel at top and secure with screws at top.
Installation:
Remove retaining screws and secure to back-rest frame.
Tighten down all screws, starting at the bottom.
Note:
The operation "Removing top of rear panel on front seat back-
rest" ends here.
Only "Replacing complete top of rear panel on front seat back-
rest":
Lever out middle wooden finisher with fishbone and remove.
Install clips in aperture.
RA Removing and installing/replacing top rear panel on front seat backrest (luxury
BMW AG - TIS
23.02.2013 19:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -