7 Series E38 728i (M52TU) SAL
Release screw (2) on tube clamp (1).
Push setting lever (1) forwards and guide nipple (2) up to end of
tube guide (4).
Lift out tube guide (4) upwards/downwards a little.
Installation:
When installing, if necessary insert nipple (2) in tube and
secure tube guide (4) with screw.
Press tube guide (1) down a little and remove setting lever (2)
forwards out of guide duct.
Slide nipple (1) of drive cable out of guide duct (2) completely.
RA Replacing control rail for glass sliding/tilting sunroof, left or right
BMW AG - TIS
23.02.2013 19:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
