7 Series E38 728i (M52TU) SAL
Install tube clamp (1) on right and secure with screw (2).
Withdraw drive cable (1) towards rear from tube guide (2).
Installation:
To insert, secure tube guide with screw (3).
Using a screwdriver (1), press left tube guide (2) forwards a little
and keep pressed.
Withdraw drive cable (1) towards rear from tube guide (2) and
remove screwdriver (3).
RA Removing and installing both drive cables for glass sliding/tilting sunroof actu
BMW AG - TIS
23.02.2013 19:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -