bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing _ Replacing Center Fresh-air Grill (climate Control)|Page 2763 > < 3 RA Removing And Installing _ Replacing Center Fresh-air Grill (air Conditioner Cont|Page 2761
Page 1
background image

64 22 161

Removing and installing / replacing center
fresh-air grill (climate control)

Remove footwell trim on transmission tunnel on passenger side.

Unfasten screw (1) and first lift footwell trim somewhat (2), then
pull toward front (3).

Lower right trim of glove compartment, unfasten screw (1) and
expansion rivet (2 and 3). Pull trim toward front, remove and
disconnect plug connectors from gong.

Unfasten screws, fold down upper glove compartment trim,
disconnect plug connectors from switch and light and remove trim.

Pull out expansion rivet, pull off plug connector upward and
remove side trim. Unclip footwell ventilation duct.

RA  Removing and installing / replacing center fresh-air grill (climate control)

BMW AG - TIS

23.02.2013  21:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing _ Replacing Center Fresh-air Grill (climate Control)|Page 2763 > < 3 RA Removing And Installing _ Replacing Center Fresh-air Grill (air Conditioner Cont|Page 2761