7 Series E38 728i (M52TU) SAL
67 31 650
Removing and installing / replacing drive unit
for rear seat backrest adjustment
Rear seat backrest removed,
refer to 52 25 015
Disconnect bottom of cover and expose cable.
Unscrew bolts.
Pull actuator drive (1) downwards and remove both input shafts
(2).
Note:
Do not twist input shaft (2).
Installation:
Both transmissions must have the same adjustment setting.
If necessary, twist input shaft until the input gears (1) locate
firmly against the tooth segments (2).
Carry out operational check.
RA Removing and installing / replacing drive unit for rear seat backrest adjustment
BMW AG - TIS
23.02.2013 23:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -