7 Series E38 728i (M52TU) SAL
72 12 000
Removing and installing or replacing airbag
module on passenger side
Warning!
Note safety regulations for handling airbag modules and
pyrotechnical seatbelt tensioners,
refer to MG 72
Incorrect handling can activate airbag and result in injury.
Warning!
Each time the airbag is triggered, it is necessary to replace
the passenger airbag cover (airbag cover)!
We cannot guarantee that the retaining straps of the airbag
cover will not be damaged when the airbag is triggered.
If a damaged airbag cover is reused, we cannot guarantee
that the retaining straps will work properly.
Caution!
When setting down passenger airbag cover (airbag cover), do
not damage instrument panel.
Lift out passenger airbag cover (airbag cover) and place on
instrument panel.
Note:
If necessary, use plastic wedges for removal.
When the cover is lifted out, one part of the retaining clip
remains in the instrument panel.
Do not damage instrument panel when removing.
RA Removing and installing or replacing airbag module on passenger side
BMW AG - TIS
23.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -