7 Series E38 730d (M57) SAL
Check crankshaft axial clearance.
Axial clearance.
If the permitted axial clearance is exceeded:
-
Check crankshaft and guide bearing shells.
-
Replace work parts.
Replace all main crankshaft bearing shells.
Note:
Bearing caps 1...5 are marked on exhaust side.
Bearing caps 6 and 7 are not marked.
Bearing cap 6 is a thrust bearing.
Release screw connections on main bearing from outside to
inside.
Remove main bearing caps 1...7.
Caution!
Do not place crankshaft on incremental gear.
Remove camshaft and carefully place to one side.
Replace main crankshaft bearing shells.
RA Replacing crankshaft (M57)
BMW AG - TIS
03.02.2013 03:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
