7 Series E38 730d (M57) SAL
Note:
E
Inlet camshaft
A
Exhaust camshaft
Install camshafts.
The inlet camshaft bearing covers are marked E 1 ... E 7 from
the exhaust side.
The exhaust camshaft bearing covers are marked A 1 ... A 7
from the exhaust side.
Fit bearing caps.
Insert all screws (1) and initially tighten so that they are free of
play.
Tighten down camshaft bearing caps in 1/2 turn increments evenly
from inside to outside.
Tightening torque, 11 31 1AZ .
Note:
Rotate camshafts at hexagon drive.
RA Replacing camshafts (M57)
BMW AG - TIS
03.02.2013 04:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
