7 Series E38 730d (M57) SAL
Open locks (1).
Remove cover on cable duct (2).
Installation:
Pay attention to guide pin (3).
Remove wiring harness sections (1 and 2) from cable duct (3).
All cars:
Disconnect plug (1) from oil level sensor.
Unclip lead from cable holder (2) and lay upwards.
RA Replacing wiring harness section for engine (M57)
BMW AG - TIS
03.02.2013 04:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -