7 Series E38 730d (M57) SAL
13 53 315
Removing and installing/replacing all
injectors of injection system (M57 / M57TU)
Special tools required:
•
13 5 020
•
13 5 231
•
13 5 232
•
13 5 250
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit.
•
Remove intake air manifold.
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
After disconnecting the pressure lines, it is absolutely
essential to seal the injectors and the pressure lines with
protective caps.
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
RA Removing and installing/replacing all injectors of injection system (M57 / M57TU
BMW AG - TIS
03.02.2013 04:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -