7 Series E38 730d (M57) SAL
Fit gasket (1) to new dust cover (2).
Fit guard plate (1). Fit new dust cover (2).
Bore in dust cover must be aligned with bore in steering knuckle.
Tighten special tool 31 2 110 firmly down.
Slide on new bearing unit and fit using special tool 31 2 110.
Tighten new collar nut to specified torque,
refer to Technical Data 31 21 1AZ,
and calk.
RA Replacing bearings (wheel hub) for front wheel
BMW AG - TIS
03.02.2013 05:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
