7 Series E38 730d (M57) SAL
Remove steering angle sensor (1) from steering spindle.
Installation:
Pin for securing rotation (2) must engage in steering angle
sensor (1).
Lift out snap ring (1).
Remove end collar (2) and spring (3).
Remove steering spindle and pull out steering column tube.
Installation:
Fit spring (3) and end collar (2).
Recess in collar must point to snap ring.
Fit snap ring (1) with special tool 32 3 070.
Knock lower steering-spindle bearing out of outer tube.
Installation:
Press contact ring out of new bearing.
Drive in new bearing (1) with special tools 32 1 150
and 00 5 500.
Caution!
Press contact ring - for horn earth - back into bearing.
RA Dismantling and assembling complete steering column
BMW AG - TIS
03.02.2013 06:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
