7 Series E38 730d (M57) SAL
b)
Rubber mounts in rear-axle
carrier faulty
c)
Control arm deformed
d)
Rubber mount and swinging
arm unserviceable
e)
Rear axle carrier deformed
f)
Traction strut mis-shapen
a)
Height setting, refer to
Technical Data MG 33
b)
Replacing rubber mount
c)
Replacing control arm, refer to
33 32 071
d)
Replace swinging arm, refer to
33 32 064
e)
Check rear-axle carrier, replace
if necessary
f)
Check steering traction strut,
replacing if necessary, refer to
33 32 091
9.
Deviation from the geometric
axis
Prerequisite: rear wheel total toe
value must be correct.
a)
Distortion in floor assembly
a)
Repair body
RA Troubleshooting after wheel/chassis alignment check on front axle/rear axle
BMW AG - TIS
03.02.2013 06:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -