7 Series E38 730d (M57) SAL
34 00 047
Bleeding brake system with ABS
Important!
Read and comply with General Information.
Refer to 34 00 ...
Bleeder device: Refer to BMW Service Workshop
equipment/Planning documentation. Attach to expansion tank.
Note:
Check relevant Operating Instructions for each device.
Charging pressure must not exceed 2 bar.
Connect bleeder hose with bottle to rear-right brake caliper. Open
bleed valve and fully depress brake pedal at least 12 times.
Note:
Brake fluid must emerge without bubbles.
Hold down brake pedal in fully depressed position.
Close bleeder valve.
Release brake pedal.
Follow same procedure on wheel brakes rear left, front right and
front left.
Important!
With fixed caliper, bleed both sides of brake caliper, removing
wheel if necessary.
RA Bleeding brake system with ABS
BMW AG - TIS
03.02.2013 07:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
