7 Series E38 730d (M57) SAL
Align and fasten the replacement part.
Install the belt height adjustment and correct the position of the
replacement part if necessary.
Distance (A) = 170 mm
Weld the reinforcement plate to the connection point B-column
from inside the passenger compartment.
Fit individual welding spots so close together that a continuous
seam is created.
Grind down welded surfaces.
Weld the reinforcement plate to the connection point B-column in
the cutout area.
Fit individual welding spots so close together that a continuous
seam is created.
Grind down welded surfaces.
Weld the joint surfaces of the side member.
Fit individual welding spots so close together that a continuous
seam is created.
Mark the door opening with points.
Weld the underbody.
Grind down welded surfaces.
RA Replacing left or right side member cover (partial replacement of A-column and r
BMW AG - TIS
03.02.2013 08:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -