7 Series E38 730d (M57) SAL
Shaped part with bore:
After locating the shaped part, ensure that recesses on retaining
tabs are sealed and, if necessary, reseal them.
Apply an approx. 15 mm high bead of original BMW windshield
adhesive on the contact surface of the shaped part.
Caution!
Increase height of glue bead to min. 20 mm at edges (1, 2)
and other critical sealing points.
Fit, secure and weld up spare part.
RA Installing shaped parts for cavity bulkheads, except for cover for side member
BMW AG - TIS
03.02.2013 08:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
