7 Series E38 730d (M57) SAL
4. Open trunk lid.
Screw in detent buffer until left and right sides of trunk lid locate
against detent buffers when closed.
Caution!
Trunk lid must not protrude above side panels otherwise
height adjustment can be distorted!
5. Gently twist ejector in detent buffers to right with Phillips
screwdriver. This unlocks the detent buffers, enabling ejector to
emerge.
6. Refit plug connection to actuator motor for eccentric pin in lower
section of trunk lid lock.
Caution!
Eccentric pin in lower section of trunk lid lock rotates when
unlocking from upper section of trunk lid lock
7. Remove central key from trunk lid lock and press down
trunk lid lock. This causes eccentric pin in lower section of
trunk lid lock to rotate when pressure is applied to the upper
dead centre of the trunk lid lock.
RA Adjusting trunk lid to fit
BMW AG - TIS
03.02.2013 08:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
