7 Series E38 730d (M57) SAL
51 16 ...
Removing and installing/replacing wooden
finisher and front section on cup holder at
front
Replacing wooden finisher for OBD socket:
Snap out locking element (1) and lift out trim (2) for (OBD plug).
3
Hand mirror
Detach retaining strap from mounting of cup holder.
Release locking washers (1) by destroying them and replace
wooden finisher (2).
Installation:
Fit new wooden finisher and secure with new locking washers
(3).
Insert retaining strap (1) in support (2).
Clip trim into place and if necessary align gap.
RA Removing and installing/replacing wooden finisher and front section on cup holde
BMW AG - TIS
03.02.2013 09:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
