7 Series E38 730d (M57) SAL
Release cable ties (1) on wiring harness (2) and on cable (3).
Disconnect plug connection (4).
Release expansion rivets (1) and (2).
Release screw (3) and unhook cable (4).
Release expansion rivets (1).
Using special tool 00 9 317 (trim panel wedge), lever out
sealing bead (1) of sound insulation (2) completely or if necessary
partially.
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
03.02.2013 09:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -