7 Series E38 730d (M57) SAL
Detach cable strap (1) from hose (2).
Slide insulating cloth (3) to one side.
Snap out catches (1) from wire (2) to foam.
Feed out right tray (3) to center from wire.
Remove left tray (4) in same way as tray (3).
Fit trays (1) and (2) together.
Feed trays (1) and (2) with pump (3) out of seat subframe.
The active seat unit comprises the following components, which
must not be separated:
1.
Pump
2.
Hydraulic bubble (R), right
3.
Hydraulic bubble (L), left
RA Removing and installing/replacing drive for active seat, left or right
BMW AG - TIS
03.02.2013 10:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
