bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing _ Replacing Backrest For Rear Seat (normal_ Electric)|Page 2292 > < 2 RA Removing And Installing _ Replacing Left Or Right Side Section Of Rear Seat Back
Page 1
background image

52 25 015

Removing and installing / replacing backrest
for rear seat (normal/ electric)

Remove rear headrest,

refer to 52 25 390

Move backrest adjustment back as far as possible.

Remove side section of backrest,

refer to 52 25 008

Open box (1) for first aid kit.

Remove inside (2) and outside (3) necks.

Pull back panel upwards and unclip (3 retaining points).

Note:

If the drive for backrest adjustment is defective and the seat is
fully forward, it is difficult to remove the panel (possibility of
damage cannot be excluded).

Adjust backrest to maximum forwards position.

Removing seatbelt band and seatbelt finisher,

refer to 72 11 102

Remove hoses (1) and (2) from the hose connectors.

Note:

If no hose connectors are fitted to the hoses:

Unfasten nut. Lift control unit for lumbar support and remove
hoses (1) and (2).

.

RA  Removing and installing / replacing backrest for rear seat (normal/ electric)

BMW AG - TIS

03.02.2013  10:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing _ Replacing Backrest For Rear Seat (normal_ Electric)|Page 2292 > < 2 RA Removing And Installing _ Replacing Left Or Right Side Section Of Rear Seat Back