7 Series E38 730d (M57) SAL
61 13 ....
Repairing front right wiring harness
Remove the following parts first:
Remove passenger seat.
Refer to 52 13 000.
Remove glovebox,
refer to 51 16 360.
Remove right entrance cover strip.
Refer to 51 47 000.
Remove right A-pillar trim.
Remove ventilation channel for footwell on right.
If necessary, cut open the carpeting below the heater at the
tunnel. Fold the carpet forwards and tie up to the center console.
Loosen the nuts and remove the wiring harness cover.
Separate the entire wiring harness exactly at the tailboard
feedthrough. Unwrap the wiring harness and lay it back in the
footwell.
Pull the other end of the wiring harness with the rubber grommet
into the engine compartment and connect to all plug connections.
RA Repairing front right wiring harness
BMW AG - TIS
03.02.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
