7 Series E38 730d (M57) SAL
65 52 023
Replacing panel for on-board monitor (control
panel, widescreen)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove complete on-board monitor (widescreen)
Release screws (1).
Remove upper housing section (2) in direction of arrow.
Raise locks (1) in direction of arrow.
Detach ribbon cables (2) and feed out at catches (3).
Installation:
Make sure ribbon cables are correctly seated.
RA Replacing panel for on-board monitor (control panel, widescreen)
BMW AG - TIS
03.02.2013 17:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
