7 Series E38 730d (M57) SAL
84 11 520
Removing and installing/replacing transceiver
If necessary, remove video module for on-board monitor.
If necessary, remove receiver module of Global Positioning
System (GPS).
Release knurled nut and disconnect antenna plug (1).
Unfasten plug connection (2) and disconnect.
Release screw (3).
Withdraw mounting bracket (4) from guide and remove.
Installation:
Ensure mounting bracket (4) is correctly seated.
Remove transmit-receive unit (5) in direction of arrow.
Installation:
Ensure sealing strips are correctly positioned.
If necessary, replace sealing strip.
RA Removing and installing/replacing transceiver
BMW AG - TIS
03.02.2013 18:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
