7 Series E38 730d (M57) SAL
VK-21, Pelz
Register/Index: 5
5 02 97 (243)
Vertrieb D
KDL d. VG's u.
Imp. z. Info
08/1997
Additional angle frame sets
E38 L7
Situation:
The L7 has been lengthened from the B-pillar. This means that the rear alignment point is
now 390 mm further back and 6.6 mm higher than on the standard E38.
Additional angle frame sets are therefore required to supplement the existing angle frame
sets for proper repairs on this rear floor assembly. A difference must be made between
angle frame sets manufactured by CELETTE and by CARBENCH.
Please refer to enclosure 1.
The additional components can only be used in conjunction with the corresponding E38
angle frame sets.
Procedure:
Both additional angle frame sets are in stock as store tools and will only be delivered to
order.
SWS Additional angle frame sets E38 L7
BMW AG - TIS
03.02.2013 23:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
