7 Series E38 730i (M60-1) SAL
Support transmission with a workshop hoist.
Unfasten screws and remove cross-member.
Installation:
Tightening torque,
refer to Technical Data 23 71 2AZ.
Remove selector joint from selector shaft,
refer to 25 11 111.
Screw in special tool 23 0 210 until it is firmly connected to
radial seal (1).
Remove radial seal by screwing in screw on special tool
23 0 210.
Coat sealing lips on radial seal and selector shaft with
transmission oil.
Drive radial seal firmly home with special tool 23 0 220.
RA Replacing radial seal for selector shaft (S5D 310Z)
BMW AG - TIS
04.02.2013 08:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
