7 Series E38 730iL (M60-1) SAL
11 12 105
Removing and installing left cylinder head
(M60)
(Cylinder bank 5-8)
Remove left exhaust manifold,
refer to 11 62 142.
Unfasten drain plug for coolant on left engine block.
Drain and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 11 5AZ.
Vent cooling system and check for leaks,
refer to 17 00 039.
Remove both cylinder head covers,
refer to 11 12 004.
Remove spark plugs,
refer to 12 12 011.
Remove coolant manifold,
refer to 11 53 325.
Remove oil lines on left and right of cylinder head.
RA Removing and installing left cylinder head (M60)
BMW AG - TIS
05.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -