7 Series E38 730iL (M60-1) SAL
Fit special tool 11 2 443 to special tool 11 2 446 / 442 and
secure with special tool 11 2 444 using the spark plug thread.
Crank engine from the 45
°
before TDC position in direction of
rotation up to TDC position. Secure crankshaft in TDC position
with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before starting engine.
Attach sprocket wheel with sensor pin (1) to inlet camshaft on
cylinder bank 1 to 4 so that arrow points upwards in cylinder
axis and elongated holes are centrally aligned.
Insert screws and fit flush.
Attach special tool 11 2 400 to right cylinder head (cylinder
bank 1 to 4).
RA Removing and installing right cylinder head (M60)
BMW AG - TIS
05.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -