7 Series E38 730iL (M60-1) SAL
Caution!
Do not turn the connecting rods or crankshaft.
Use the old connecting-rod bolts to check connecting-rod
clearance.
Tighten down conrod screws with special tool 00 9 120 or
special tool 11 2 110, respectively.
Tightening torque,
refer to Technical Data 11 24 1AZ
Removing bearing cover and reading off bearing clearance,
refer to Technical Data,
on width of pinched plastic thread with the help of the measuring
scale.
Remove plastic thread.
Summary:
Colour code / shaft diameter / bearing strength
Rt = red
Bl = blue
1.
Crankpin
2.
Bearing clearance
3.
Bearing shells: red or blue
4.
Conrod
RA Replacing all conrod bearings
BMW AG - TIS
05.02.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
