7 Series E38 730iL (M60-1) SAL
Note:
When unfastening screw connection on camshaft, brace
camshaft on hex head.
Caution!
Do not damage the cylinder head.
Machine open-end wrench accordingly if necessary.
Unfasten the remaining three screws on the exhaust and intake
camshafts on cylinder bank 1-4 approx. 1/2 a turn.
Loosen the remaining three screws in the exhaust and intake
camshafts on cylinder bank 5-8 approx. 1/2 a turn.
Align all camshafts with open-end wrench in such a way that
special tools 11 2 441 / 442 fit on cylinder head without
clearance.
RA Adjusting timing of camshaft(s) (M60)
BMW AG - TIS
05.02.2013 13:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
