7 Series E38 730iL (M60-1) SAL
12 14 610
Replacing right knock sensors (cylinder bank
1 to 4) (M60, M62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Disconnect intake air manifold,
refer to 11 61 050.
Caution!
Mixing up the knock sensor plug connections will result in
engine damage!
The wiring and plug connections must correspond to the
original routing. This eliminates the risk of mix-ups.
Release screws.
Tightening torque,
refer to Technical Data 12 14 2AZ.
Remove knock sensors.
RA Replacing right knock sensors (cylinder bank 1 to 4) (M60, M62)
BMW AG - TIS
05.02.2013 13:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
