7 Series E38 730iL (M60-1) SAL
13 64 541
Replacing all injector valves (M60, M62)
Switch off ignition.
Version 1:
(Acoustic cover screwed down)
Remove seal caps (1) and unfasten nuts (2).
Remove acoustic cover.
Version 2:
(acoustic cover with press-stud fastener)
Press press-stud fasteners (1...4) in succession and at same time
raise acoustic cover slightly.
Remove acoustic cover once all four press-stud fasteners have
been unlocked.
Installation:
Position acoustic cover and press downwards until press-stud
fasteners (1...4) click into place.
Remove cable retaining bands.
Disconnect accelerator cable from throttle valve lever.
RA Replacing all injector valves (M60, M62)
BMW AG - TIS
05.02.2013 14:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
