7 Series E38 730iL (M60-1) SAL
M62
If necessary, remove front underbody protection from units,
Cars with automatic transmissions:
Turn hose plug (1) to left and detach towards bottom.
Cars with manual transmission:
Remove drain plug at bottom of radiator.
Drain, catch and dispose of coolant.
Unfasten drain plug(s) on engine block.
M62
Remove drain plugs on left and right of engine block.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Drain off and catch coolant.
Recycling
Dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Top up coolant!
Slacken vent plug (2) on expansion tank.
RA Draining and topping up coolant
BMW AG - TIS
05.02.2013 14:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
